Event Lighting PixBalls2 DMX Chart
The manufacturer publishes the Event Lighting PixBalls2's DMX footprint and no per-channel table, so this chart gives the footprint. The PDF is the same chart, laid out to print for the desk.
We hire across
DMX modes
One mode channel count
| Mode | Channels |
|---|---|
| 30 per string | 30 |
Notes on this chart3
- Event Lighting publishes no per-channel DMX table for PIXBALLS2. The product page (current and archived), the specification sheet and the sibling PIXBALLS page carry the footprint only, and the manufacturer portal that serves user manuals holds none for this product.
- The specification states DMX Channels: 30 per string, over a 5 metre string of 10 balls at 6 x 0.3W RGB LEDs per ball, so one string occupies a 30 channel block. Confirm the per-ball order on the rig before patching.
- The ARCW programmer document (Event Lighting, 'ARCW codes and applications') sets RGB fixtures with N03, three channels reserved per segment, and PIXBALL chip type C01. It prints no channel function table either.
Source: PIXBALLS2 Specification, eventlighting.com.au, retrieved 10 September 2026. Personalities can change between firmware versions, so if you are patching one of our units, ask which version it runs when you book.