Spark Fabrica Moto Spark M5 DMX Chart
The Spark Fabrica Moto Spark M5 has two DMX modes. One is set out channel by channel below, and the other is listed with its channel count. The PDF is the same chart, laid out to print for the desk.
We hire across
DMX channels
2 channel mode
| Ch | Value | Function |
|---|---|---|
| 1 | First Channel | |
| 000-010 | Stop | |
| 011-255 | Fountain Height 1~25 | |
| 2 | 000-255 | Second ChannelPre-heat off, emergency stop, clear material, pre-heat on: value bands in the notes below |
The other mode channel count
| Mode | Channels |
|---|---|
| 3 channel mode | 3 |
Notes on this chart4
- Source is the manufacturer user manual (Changsha Spark Technology Electronics Co., Ltd, sparkfabrica.com), section 3.4 DMX PARAMETER LIST, mirrored by the Australian distributor. Spark Fabrica publishes no separate DMX chart for this machine and its own product page and catalogue list no channel count.
- Second Channel: the source prints four bands that overlap, so they cannot be shown as separate ranges. As printed: Pre-heat Off 0~200; Emergency Stop 11~39; Clear Material 56~200; Pre-heat On 240~255. Values 201-239 carry no printed function. Verify the behaviour on the machine before show.
- The machine has a 2 channel mode and a 3 channel mode (6.3.1 SET CHANNEL MODE). The manual tabulates the first and second channels only and never prints a third, so the 3 channel mode is listed as a footprint. Addressing per 6.3.2: in 2 channel mode set machines to 1, 3, 5, 7 and so on; in 3 channel mode 1, 4, 7, 10 and so on.
- 6.3 INITIAL SETTING prints the DMX Channel Mode range as '2/8' with default 2, which does not match the '2 channel mode and 3 channel mode' of 6.3.1; both are reproduced as printed.
Source: MOTO SPARK USER MANUAL M5, content.event-lighting.com.au, retrieved 10 September 2026. Personalities can change between firmware versions, so if you are patching one of our units, ask which version it runs when you book.